asMODus C4 LP Single Coil RDA Atomizer
At first glance, the airflow control system might seem like your standard, run of the mill method of cooling, but we felt that we needed to add our own little twist to the tried and true dual side airflow design. Upon closer inspection, you'll see the 9 individual air inlets on either side of the sleeve are machined into the body at a slight 25º angle, creating a cyclonic airflow within the chamber that maximizes the area of the coil that is contacted by the incoming air, creating a greater amount of vapor, but more importantly, flavor, when compared to any low-profile flavor-oriented RDA on the market. A domed top cap acts to enhance this already heavenly flavor profile even further, granting the C4 a top spot in the category of flavor-oriented RDAs.
The asmodus C4 dripping atomizer also retains the locking barrel design first implemented on the Nefarius RDTA, using two notches machined into the base of the atomizer that perfectly mesh together with the protrusions located on the appropriate positions on the outer barrel to ensure the airflow is aligned perfectly while allowing for the airflow inlets to be adjusted without fear of misalignment. A convenient and often overlooked design element, this method of securing the top cap allows for the user to drip and replace the cap without having to pay careful attention to ensure proper alignment of the airflow and coils, with a simple twist being all that is needed to guarantee omptimal performance.
The core of the C4 bottom feed RDA is the unique dual post design that places either post on the edges of the build deck, with the coil of the user's choosing being easily installed due to the wide terminal slots that use top-mounted grub hex screws to securely retain the leads without the risk of accidentally clipping them due to excessive amounts of force used to tighten the screws. We have also machined coil alignment grooves into the walls of the deck, allowing for the rod used to hold and manipulate the coil to be simply set into the designated slots, placing the heating element in the perfect position for optimal performance. The juice well itself features a subtle concave shape, just enought to help funnel any excess juice towards the wick, decreasing the risk of dry hits, the bane of any vaper. As well as the standard pre-installed 510 pin, we've also provided a specially designed BF 510 pin with two separate juice outlets that act to evenly distribute juice squonked into the atty for a more even wicking method.
We've poured our hearts and souls into this amazing little guy, and all this effort has resulted in an atomizer we are proud to call our own. The C4 provides an explosion of flavor sure to blow you away, and we're confident that it will set off an explosion of innovation in the RDA market.
Compatible with single coil builds
304 stainless steel and 6063 anodized aluminum construction
Two-post design w/ top-mounted hex screws
24K gold-plated deck for maximum conductivity and an elegant aesthetic
First of its kind dual adjustable 9 inlet cyclonic airflow
Locking barrel sleeve
Coil alignment grooves
Concave juice well direct juice towards wicks
Domed aluminum top cap
Gold-plated 510 pin and gold-plated split BF pin included
Included 810 acrylic and stabilized wood tapered drip tip
Included 810 low-profile wide bore Delrin drip tip
1x asMODus C4 BF 24mm RDA
2x Oni pre-built 0.2 ohm triple fused clapton coils
1x Allen key used for installing coils
1x Allen key for removing 510 pin
1x Gold-plated 510 pin
1x Gold-plated split BF 510 pin
1x Acrylic HoneyComb 810 drip tip
1x Delrin snub-nosed 810 drip tip
1x Spare parts bag
1x User manual
WARNING: There is inherent risk with the use of any and all rechargeable batteries. Li-ion and and Li-Po batteries are made for RC Cars, flashlights, and laptops and not recommended for use in any other way. DO NOT use with e-cigarettes, vaporizers, or any other similar devices as these batteries are not designed for that type of usage. High drain batteries such as the ones found on this site are made for powering RC Cars, flashlights, and laptops and using them in any other way is dangerous as they consist of volatile and combustible components. Batteries are meant to be used within their recommended parameters and we cannot be held liable if used otherwise. The electronic devices we put for sale are for decorative purposes only. Do not put any battery or power up these decorative products, as it may cause fire or explode. Use at your own risk! No claims, representations or warranties, whether expressed or implied, are made by our company as to the safety, reliability, durability and performance of any of our companies' products. Furthermore, our company accepts no liability whatsoever for the safety, reliability, durability and performance of any of products or content found within this site. In no event shall our company be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products. By purchasing any product found within the content of our site, I agree to hereby release and forever discharge our company, their directors, officers, agents, employees, representatives, volunteers, attorneys, assigns, and affiliates from any and all claims and demands of whatever kind of nature, whether known or unknown, that arise out or are connected in anyway whatsoever with any first aid, medical treatment or services rendered me because of my use of the product. Our company will not be held responsible or liable for any injury, damage, or defects, permanent or temporary, that may be caused by improper use of any item found on our site. Please have a basic understanding of batteries and or any item found within this site and how to care for them properly.